
## Build

**Enter the venv**
> \# python3 -m venv /home/lade/python_venv. <br>
> \# source venv/bin/activate

**Compile and upload**
> \# esphome run file.yaml 


## Devices Pinout

**ESP32 - C3 - Mini** <br>
![ESP32 C3 Mini.](files/ESP32-C3-Zero-details-inter.jpg "ESP32 C3 Mini."){width=50%}

## ESP Tank
**Read the water level from the water tank**

name : esptank32

**Mapping**
| GPIO          | Device        |
| ------------- |:-------------:|
| GPIO0         | ADC SDA       |
| GPIO1         | ADC SCL       |

**Description**

Components
 - TL-136 : Imerged pressure sensor, current from 4 to 20mA, working voltage 24V
 - Voltage Booster : (boost from 5v to 24v) + output connected to the TL-136
 - ADC 1115 : ADC 16 Bit (read -4V to +4V), measure value on the resistor
 - Resistor 220 Ohm (between the TL-136 and ground)

## ESP Water
**Water consumption meter, connected to a CO2 injector, with 16x08 display**

## ESP Salon
**Multiple environment sensor and display**

## ESP Dimmer
**High power triac controller based on esp8266**



