save with new api key method

espgaz.yaml

@@ -0,0 +1,110 @@
+esphome:
+  name: espgaz
+  platform: ESP32
+  board: esp-wrover-kit
+   
+  on_boot:
+    priority: 200
+    then:
+    - light.turn_on:
+        id:  cam_light
+        brightness: 65%
+    # - mqtt.publish:
+        # topic: espgaz/last_update
+        # payload: "Something happened!"
+
+# deep_sleep:
+  # run_duration: 50sec
+  # sleep_duration: 550sec
+
+logger:
+
+api:
+  encryption:
+    key: !secret api_encryption_key
+
+ota:
+  password: !secret ota_key
+
+wifi:
+  ssid: "lauIOT"
+  password: "superiot1"
+  domain: .home.cabestan.be
+
+  ap:
+    ssid: "Espgaz Fallback Hotspot"
+    password: !secret ap_secret
+
+captive_portal:
+
+web_server:
+  port: 80
+
+time:
+  - platform: sntp
+    id: esptime
+    timezone: "Europe/Brussels"
+    on_time:
+      - seconds: /30
+        then:
+          - light.turn_on:
+              id:  cam_light
+              brightness: 65%
+          - delay: 1s
+          - mqtt.publish:
+              topic: espgaz/last_update
+              payload: !lambda |-
+                char out[32];
+                sprintf(out,"%f",id(my_uptime).state);
+                return out;
+          - delay: 5s
+          - light.turn_off:
+              id:  cam_light
+
+mqtt:
+  broker: 192.168.30.10
+  username: espgaz
+  password: "65eg64e8r7g98"
+  id: esp_mqtt
+
+sensor:
+  - platform: uptime
+    name: Uptime Sensor
+    id: my_uptime
+ 
+esp32_camera:
+  name: cam_gas_counter
+  ae_level: 1
+  external_clock:
+    pin: GPIO0
+    frequency: 20MHz
+  i2c_pins:
+    sda: GPIO26
+    scl: GPIO27
+  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
+  vsync_pin: GPIO25
+  href_pin: GPIO23
+  pixel_clock_pin: GPIO22
+  power_down_pin: GPIO32
+  jpeg_quality: 10
+  special_effect: grayscale
+  max_framerate: 2fps
+  resolution: 1600x1200 
+  idle_framerate: 0.1fps
+
+esp32_camera_web_server:
+  - port: 8080
+    mode: snapshot
+
+output:
+  - platform: ledc
+    pin: GPIO4
+    id: gpio_4
+    channel: 2
+
+## GPIO_4 is the flash light pin
+light:
+  - platform: monochromatic
+    output: gpio_4
+    name: PWM light
+    id: cam_light