add analog sensor to esptest2

espfantemp-OK.yaml

@@ -1,131 +0,0 @@
-esphome:
-  name: espfan
-  platform: ESP8266
-  board: d1_mini
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-  password: "feelhome123"
-
-ota:
-  password: "feelhome123"
-
-wifi:
-  ssid: "lauIOT"
-  password: "superiot1"
-  domain: .home.cabestan.be
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "EspFan Fallback Hotspot"
-    password: "jTlMOFiFOzog"
-
-captive_portal:
-
-web_server:
-  port: 80
-
-
-time:
-  - platform: sntp
-    id: esptime
-    timezone: "Europe/Brussels"
-    on_time:
-      # Every 5 minutes
-      - seconds: /10
-        then:
-          - lambda: |-
-              ESP_LOGD("custom", "Test sensor is : %.1f   [min: %.1f | max:  %.1f] state: \n", id(tsensor).state, id(tmin).state, id(tmax).state );
-              
-              if( id(tsensor).state < id(tmin).state ) {
-                auto call = id(my_fan).turn_off();
-                call.perform();
-                ESP_LOGD("custom", "Temp is low, so turn off");
-                return;
-                }
-                
-              auto call = id(my_fan).turn_on();
-              call.perform();
-              
-              id(my_fan).speed = ( id(tsensor).state - id(tmin).state ) / ( id(tmax).state - id(tmin).state ) *100 ;
-              
-              ESP_LOGD("custom", "Threshold = %.1f % \n", ( id(tsensor).state - id(tmin).state ) / ( id(tmax).state - id(tmin).state ) *100 );
-              
-              
-              
-              
-fan:
-  - platform: speed
-    output: output_fan
-    name: "Fan"
-    restore_mode: ALWAYS_ON 
-    id: my_fan
-
-dallas:
-  - pin: GPIO4
-    update_interval: 5s
-
-
-
-
-
-number:
-  - platform: template
-    name: "Sensibilité"
-    optimistic: true
-    min_value: 0
-    max_value: 100
-    initial_value: 80
-    step: 1
-    id: sensivity
-    
-  - platform: template
-    name: "T Max"
-    optimistic: true
-    min_value: 20
-    max_value: 60
-    initial_value: 35
-    step: 1
-    id: tmax
-    
-  - platform: template
-    name: "T Min"
-    optimistic: true
-    min_value: 0
-    max_value: 20
-    initial_value: 20
-    step: 1
-    id: tmin
-  
-
-sensor:
-  - platform: dallas
-    address: 0x5f0000041a8f8628
-    name: "Battery Charger Temp"
-    id: tsensor
-
-
-# sensor:
-  # - platform: pulse_counter
-    # pin:
-      # number: D2
-    # name: Fan Speed
-    # id: fan_rpm
-    # unit_of_measurement: 'RPM'
-    # filters:
-      # - multiply: 1
-    # update_interval: 3s
-    # count_mode:
-      # rising_edge: INCREMENT
-      # falling_edge: DISABLE
-
-# Example output entry
-output:
-  - platform: esp8266_pwm
-    id: output_fan
-    pin: D1
-    max_power: 100%
-    frequency: 25000 Hz

espgaz.yaml

@@ -1,110 +0,0 @@
-esphome:
-  name: espgaz
-  platform: ESP32
-  board: esp-wrover-kit
-   
-  on_boot:
-    priority: 200
-    then:
-    - light.turn_on:
-        id:  cam_light
-        brightness: 65%
-    # - mqtt.publish:
-        # topic: espgaz/last_update
-        # payload: "Something happened!"
-
-# deep_sleep:
-  # run_duration: 50sec
-  # sleep_duration: 550sec
-
-logger:
-
-api:
-  encryption:
-    key: !secret api_encryption_key
-
-ota:
-  password: !secret ota_key
-
-wifi:
-  ssid: "lauIOT"
-  password: "superiot1"
-  domain: .home.cabestan.be
-
-  ap:
-    ssid: "Espgaz Fallback Hotspot"
-    password: !secret ap_secret
-
-captive_portal:
-
-web_server:
-  port: 80
-
-time:
-  - platform: sntp
-    id: esptime
-    timezone: "Europe/Brussels"
-    on_time:
-      - seconds: /30
-        then:
-          - light.turn_on:
-              id:  cam_light
-              brightness: 65%
-          - delay: 1s
-          - mqtt.publish:
-              topic: espgaz/last_update
-              payload: !lambda |-
-                char out[32];
-                sprintf(out,"%f",id(my_uptime).state);
-                return out;
-          - delay: 5s
-          - light.turn_off:
-              id:  cam_light
-
-mqtt:
-  broker: 192.168.30.10
-  username: espgaz
-  password: "65eg64e8r7g98"
-  id: esp_mqtt
-
-sensor:
-  - platform: uptime
-    name: Uptime Sensor
-    id: my_uptime
- 
-esp32_camera:
-  name: cam_gas_counter
-  ae_level: 1
-  external_clock:
-    pin: GPIO0
-    frequency: 20MHz
-  i2c_pins:
-    sda: GPIO26
-    scl: GPIO27
-  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
-  vsync_pin: GPIO25
-  href_pin: GPIO23
-  pixel_clock_pin: GPIO22
-  power_down_pin: GPIO32
-  jpeg_quality: 10
-  special_effect: grayscale
-  max_framerate: 2fps
-  resolution: 1600x1200 
-  idle_framerate: 0.1fps
-
-esp32_camera_web_server:
-  - port: 8080
-    mode: snapshot
-
-output:
-  - platform: ledc
-    pin: GPIO4
-    id: gpio_4
-    channel: 2
-
-## GPIO_4 is the flash light pin
-light:
-  - platform: monochromatic
-    output: gpio_4
-    name: PWM light
-    id: cam_light