new revision of the yaml syntax esphome

.gitignore

@@ -2,5 +2,7 @@
 # This is an example and may include too much for your use-case.
 # You can modify this file to suit your needs.
 /.esphome/
-/secrets.yaml
+/secrets/*
+secrets.yaml
+./secrets.yaml
 /venv/*

build.sh

@@ -1,4 +0,0 @@
-python3 -m venv /home/lade/python_venv.
-source venv/bin/activate
-
-

espfantemp-OK.yaml

@@ -1,131 +0,0 @@
-esphome:
-  name: espfan
-  platform: ESP8266
-  board: d1_mini
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-api:
-  password: "feelhome123"
-
-ota:
-  password: "feelhome123"
-
-wifi:
-  ssid: "lauIOT"
-  password: "superiot1"
-  domain: .home.cabestan.be
-
-  # Enable fallback hotspot (captive portal) in case wifi connection fails
-  ap:
-    ssid: "EspFan Fallback Hotspot"
-    password: "jTlMOFiFOzog"
-
-captive_portal:
-
-web_server:
-  port: 80
-
-
-time:
-  - platform: sntp
-    id: esptime
-    timezone: "Europe/Brussels"
-    on_time:
-      # Every 5 minutes
-      - seconds: /10
-        then:
-          - lambda: |-
-              ESP_LOGD("custom", "Test sensor is : %.1f   [min: %.1f | max:  %.1f] state: \n", id(tsensor).state, id(tmin).state, id(tmax).state );
-              
-              if( id(tsensor).state < id(tmin).state ) {
-                auto call = id(my_fan).turn_off();
-                call.perform();
-                ESP_LOGD("custom", "Temp is low, so turn off");
-                return;
-                }
-                
-              auto call = id(my_fan).turn_on();
-              call.perform();
-              
-              id(my_fan).speed = ( id(tsensor).state - id(tmin).state ) / ( id(tmax).state - id(tmin).state ) *100 ;
-              
-              ESP_LOGD("custom", "Threshold = %.1f % \n", ( id(tsensor).state - id(tmin).state ) / ( id(tmax).state - id(tmin).state ) *100 );
-              
-              
-              
-              
-fan:
-  - platform: speed
-    output: output_fan
-    name: "Fan"
-    restore_mode: ALWAYS_ON 
-    id: my_fan
-
-dallas:
-  - pin: GPIO4
-    update_interval: 5s
-
-
-
-
-
-number:
-  - platform: template
-    name: "Sensibilité"
-    optimistic: true
-    min_value: 0
-    max_value: 100
-    initial_value: 80
-    step: 1
-    id: sensivity
-    
-  - platform: template
-    name: "T Max"
-    optimistic: true
-    min_value: 20
-    max_value: 60
-    initial_value: 35
-    step: 1
-    id: tmax
-    
-  - platform: template
-    name: "T Min"
-    optimistic: true
-    min_value: 0
-    max_value: 20
-    initial_value: 20
-    step: 1
-    id: tmin
-  
-
-sensor:
-  - platform: dallas
-    address: 0x5f0000041a8f8628
-    name: "Battery Charger Temp"
-    id: tsensor
-
-
-# sensor:
-  # - platform: pulse_counter
-    # pin:
-      # number: D2
-    # name: Fan Speed
-    # id: fan_rpm
-    # unit_of_measurement: 'RPM'
-    # filters:
-      # - multiply: 1
-    # update_interval: 3s
-    # count_mode:
-      # rising_edge: INCREMENT
-      # falling_edge: DISABLE
-
-# Example output entry
-output:
-  - platform: esp8266_pwm
-    id: output_fan
-    pin: D1
-    max_power: 100%
-    frequency: 25000 Hz

espgaz.yaml

@@ -1,110 +0,0 @@
-esphome:
-  name: espgaz
-  platform: ESP32
-  board: esp-wrover-kit
-   
-  on_boot:
-    priority: 200
-    then:
-    - light.turn_on:
-        id:  cam_light
-        brightness: 65%
-    # - mqtt.publish:
-        # topic: espgaz/last_update
-        # payload: "Something happened!"
-
-# deep_sleep:
-  # run_duration: 50sec
-  # sleep_duration: 550sec
-
-logger:
-
-api:
-  encryption:
-    key: !secret api_encryption_key
-
-ota:
-  password: !secret ota_key
-
-wifi:
-  ssid: "lauIOT"
-  password: "superiot1"
-  domain: .home.cabestan.be
-
-  ap:
-    ssid: "Espgaz Fallback Hotspot"
-    password: !secret ap_secret
-
-captive_portal:
-
-web_server:
-  port: 80
-
-time:
-  - platform: sntp
-    id: esptime
-    timezone: "Europe/Brussels"
-    on_time:
-      - seconds: /30
-        then:
-          - light.turn_on:
-              id:  cam_light
-              brightness: 65%
-          - delay: 1s
-          - mqtt.publish:
-              topic: espgaz/last_update
-              payload: !lambda |-
-                char out[32];
-                sprintf(out,"%f",id(my_uptime).state);
-                return out;
-          - delay: 5s
-          - light.turn_off:
-              id:  cam_light
-
-mqtt:
-  broker: 192.168.30.10
-  username: espgaz
-  password: "65eg64e8r7g98"
-  id: esp_mqtt
-
-sensor:
-  - platform: uptime
-    name: Uptime Sensor
-    id: my_uptime
- 
-esp32_camera:
-  name: cam_gas_counter
-  ae_level: 1
-  external_clock:
-    pin: GPIO0
-    frequency: 20MHz
-  i2c_pins:
-    sda: GPIO26
-    scl: GPIO27
-  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]
-  vsync_pin: GPIO25
-  href_pin: GPIO23
-  pixel_clock_pin: GPIO22
-  power_down_pin: GPIO32
-  jpeg_quality: 10
-  special_effect: grayscale
-  max_framerate: 2fps
-  resolution: 1600x1200 
-  idle_framerate: 0.1fps
-
-esp32_camera_web_server:
-  - port: 8080
-    mode: snapshot
-
-output:
-  - platform: ledc
-    pin: GPIO4
-    id: gpio_4
-    channel: 2
-
-## GPIO_4 is the flash light pin
-light:
-  - platform: monochromatic
-    output: gpio_4
-    name: PWM light
-    id: cam_light

espgaz2.yaml

@@ -0,0 +1,75 @@
+esphome:
+  name: espgaz32
+  platformio_options:
+    board_build.flash_mode: dio
+
+esp32:
+  board: esp32-s3-devkitc-1
+   
+logger:
+
+api:
+  password: !secret api_secret
+
+ota:
+  platform: esphome
+  password: !secret ota_key
+
+wifi:
+  ssid:     !secret wireless_ssid
+  password: !secret wireless_key
+  domain:   !secret wireless_domain
+
+  ap:
+    ssid: "ESPgaz_Fallback"
+    password: !secret ap_secret
+
+captive_portal:
+
+web_server:
+  port: 80
+
+time:
+  - platform: sntp
+    id: sntp_time
+    servers: 
+      - 193.190.198.10
+#    timezone: "Europe/Brussels"
+    on_time_sync:
+      then:
+        - logger.log: "NTP : Synchronized sntp clock"
+        
+mqtt:
+  broker: domotic.home.cabestan.be
+  username: espsalon
+  password: !secret mqtt_espsalon
+
+
+globals:
+  - id: drops_absolute
+    type: unsigned long int
+    restore_value: yes
+    initial_value: '0'
+
+
+binary_sensor:
+  - platform: gpio
+    pin: 
+      number: GPIO6
+      mode:
+        input: true
+        pulldown: true
+    name: "gaz volume add"
+    id: gaz_volume_add
+
+sensor:
+  - platform: template
+    name: gaz volume
+    id: gazvolume
+    unit_of_measurement: "m"
+    icon: "mdi:gauge"
+    lambda: return (3.02);
+    accuracy_decimals: 0
+
+
+

espsalon.yaml

@@ -1,6 +1,7 @@
 esphome:
   name: espsalon
-  platform: ESP8266
+
+esp8266:
   board: d1_mini
 
 # Enable logging

espsensor32.yaml

@@ -1,8 +1,10 @@
 esphome:
   name: espsensor32
-  platform: ESP32
+
+esp32:
   board: esp-wrover-kit
 
+
 logger:
 
 api:
@@ -37,7 +39,7 @@ time:
         - logger.log: "NTP : Synchronized sntp clock"
         
 mqtt:
-  broker: domotic.home.cabestan.be
+  broker: !secret mqtt_broker
   username: espsalon
   password: !secret mqtt_espsalon
 

esptank.yaml

@@ -40,7 +40,7 @@ time:
         - logger.log: "NTP : Synchronized sntp clock"
         
 mqtt:
-  broker: domotic.home.cabestan.be
+  broker: !secret mqtt_broker
   username: espsalon
   password: !secret mqtt_espsalon
 
@@ -51,6 +51,16 @@ i2c:
   frequency: 300kHz
   id: bus_a
 
+globals:
+   - id: gaz_impulse
+     type: int
+     restore_value: no
+     initial_value: '0'
+   - id: gaz_volume
+     type: float
+     restore_value: no
+     initial_value: '0'
+
 ads1115:
   - address: 0x48
 
@@ -60,15 +70,19 @@ sensor:
     gain: 6.144
     name: "ADS1115 Channel A0"
     id: ads0
-    update_interval: 5s
+    update_interval: 3s
     on_value:
       then:
         - component.update: waterlevel
         - component.update: waterpercent
         - component.update: watervolume
     filters:
+      #        - median:
+      #            window_size: 20
+      #            send_every: 5
+      #            send_first_at: 3
         - sliding_window_moving_average:
-            window_size: 30
+            window_size: 60
             send_every: 10
     # 0.74 volts à vide.
     # 2.8 volts plein.
@@ -98,5 +112,43 @@ sensor:
     lambda: return ( id(ads0).state - 0.74 ) * 0.9 / 2.0 * 5000.0;
     accuracy_decimals: 0
 
+  - platform: template
+    name: gaz impulse
+    id: gaz_impulse_sensor
+    lambda: return id(gaz_impulse);
     
+  - platform: template
+    name: gaz volume
+    id: gaz_volume_sensor
+    lambda: return id(gaz_volume);
 
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO5
+      inverted: true
+      mode:
+        input: true
+        pullup: true
+    name: "gaz volume add"
+    id: gaz_volume_add
+    on_press:
+      - then:
+        - lambda: 'id(gaz_impulse) += 1; id(gaz_volume) += 0.01; '
+        - sensor.template.publish:
+            id: gaz_impulse_sensor
+            state: !lambda 'return id(gaz_impulse);'
+            
+button:
+  - platform: template
+    name: Reset counters
+    id: button_reset_counters
+
+    # Optional variables:
+    icon: "mdi:emoticon-outline"
+    on_press:
+      - logger.log: "Button pressed reset counters"
+      - lambda: 'id(gaz_impulse) = 0; id(gaz_volume) = 0.00; '
+      - sensor.template.publish:
+            id: gaz_impulse_sensor
+            state: !lambda 'return id(gaz_impulse);'

esptest2.yaml

@@ -0,0 +1,186 @@
+esphome:
+  name: esptest2
+  platform: ESP32
+  board: esp-wrover-kit
+   
+logger:
+
+api:
+  password: !secret api_secret
+
+ota:
+  platform: esphome
+  password: !secret ota_key
+
+wifi:
+  ssid:     !secret wireless_ssid
+  password: !secret wireless_key
+  domain:   !secret wireless_domain
+
+  ap:
+    ssid: "ESPtest2_Fallback"
+    password: !secret ap_secret
+
+captive_portal:
+
+web_server:
+  port: 80
+
+time:
+  - platform: sntp
+    id: sntp_time
+    servers: 
+      - 193.190.198.10
+#    timezone: "Europe/Brussels"
+    on_time_sync:
+      then:
+        - logger.log: "NTP : Synchronized sntp clock"
+        
+mqtt:
+  broker: domotic.home.cabestan.be
+  username: espsalon
+  password: !secret mqtt_espsalon
+
+i2c:
+  sda: 21
+  scl: 22
+  scan: true
+  frequency: 300kHz
+  id: bus_a
+
+font:
+  - file: "fonts/Roboto/Roboto-Black.ttf"
+    id: my_font_16
+    size: 16
+  - file: "fonts/Roboto/Roboto-Black.ttf"
+    id: my_font_14
+    size: 14
+  - file: "fonts/materialdesignicons-webfont.ttf"
+    id: icons_14
+    size: 14
+    glyphs:
+      - "\U000F050F" # mdi-home-thermometer
+      - "\U000F058E" # mdi-water-percent
+      - "\U000F015F" # mdi-cloud
+      - "\U000F1252" # mdi-home-lightbulb-outline
+      - "\U000F0A60" # mdi-ip-network
+
+globals:
+   - id: global_32
+     type: int
+     restore_value: no
+     initial_value: '0'
+   - id: global_33
+     type: int
+     restore_value: no
+     initial_value: '0'
+   - id: global_25
+     type: int
+     restore_value: no
+     initial_value: '0'
+   - id: global_26
+     type: int
+     restore_value: no
+     initial_value: '0'
+   - id: global_27
+     type: int
+     restore_value: no
+     initial_value: '0'
+
+display:
+  - platform: ssd1306_i2c
+    model: "SSD1306 128x64"
+    address: 0x3C
+    external_vcc: False
+    id: saloon_display
+    rotation: 90
+    # lambda: |-
+      # it.print(0, 0, id(my_font_16), "Hello World!");
+    pages:
+      - id: page1
+        lambda: |-
+          it.strftime( 32,  0, id(my_font_16), TextAlign::TOP_CENTER , "%H:%M:%S" , id(sntp_time).now()   );
+          it.printf(    0, 25, id(my_font_14),   TextAlign::TOP_LEFT , "v1:");
+          it.printf(   32, 25, id(my_font_14), TextAlign::TOP_LEFT , "%d" , id(binary_32).state  );
+          
+          it.printf(    0, 45, id(my_font_14),   TextAlign::TOP_LEFT , "v2:");
+          it.printf(   32, 45, id(my_font_14), TextAlign::TOP_LEFT , "%d" , id(binary_33).state  );
+          
+          it.printf(    0, 65, id(my_font_14),   TextAlign::TOP_LEFT , "v3:");
+          it.printf(   32, 65, id(my_font_14), TextAlign::TOP_LEFT , "%d" , id(binary_25).state  );
+          
+          it.printf(    0, 85, id(my_font_14),   TextAlign::TOP_LEFT , "v4:");
+          it.printf(   32, 85, id(my_font_14), TextAlign::TOP_LEFT , "%d" , id(binary_26).state  );
+          
+          it.printf(    0, 105, id(my_font_14),   TextAlign::TOP_LEFT , "a5");
+          it.printf(   32, 105, id(my_font_14), TextAlign::TOP_LEFT , "%f" , id(analog_36).state );
+        # it.printf(   18, 105, id(my_font_14), TextAlign::TOP_LEFT , "%s" , id(nw_connected).state    ); 
+
+
+sensor:
+  - platform: esp32_hall
+    name: "ESP32 Hall Sensor"
+    update_interval: 3s
+
+  - platform: adc
+    pin: 
+      number: GPIO36
+      mode:
+        input: true
+          #        pulldown: true
+    name: analog hall sensor
+    update_interval: 3s
+    id: analog_36
+
+  - platform: vl53l0x
+    name: "VL53L0x Distance"
+    address: 0x29
+    update_interval: 10s
+    long_range: true 
+    
+binary_sensor:
+  - platform: gpio
+    pin: 
+      number: 32
+      inverted: true
+      mode:
+        input: true
+        pullup: true
+    name: "binary_32"
+    id: binary_32
+  - platform: gpio
+    pin: 
+      number: 33
+      inverted: true
+      mode:
+        input: true
+        pullup: true
+    name: "binary_33"
+    id: binary_33
+  - platform: gpio
+    pin: 
+      number: 25
+      inverted: true
+      mode:
+        input: true
+        pullup: true
+    name: "binary_25"
+    id: binary_25
+  - platform: gpio
+    pin: 
+      number: 26
+      inverted: true
+      mode:
+        input: true
+        pullup: true
+    name: "binary_26"
+    id: binary_26
+  - platform: gpio
+    pin: 
+      number: 27
+      inverted: true
+      mode:
+        input: true
+        pullup: true
+    name: "binary_27"
+    id: binary_27

espwater.yaml

@@ -1,8 +1,10 @@
 esphome:
   name: espwater
-  platform: ESP32
-  board: nodemcu-32s
 
+esp32:
+  board: nodemcu-32s
+  framework:
+    type: arduino
 
 logger:
 
@@ -30,7 +32,7 @@ web_server:
 
 mqtt:
   #  broker: hass20.home.cabestan.be
-  broker: domotic.home.cabestan.be
+  broker: !secret mqtt_broker
     # username: espsalon
   username: espwater
     #  password: sala45224

salon32.yaml

@@ -1,143 +0,0 @@
-esphome:
-  name: espsalon32
-  platform: ESP32
-  board: esp-wrover-kit
-   
-logger:
-
-api:
-  password: !secret api_secret
-
-ota:
-  platform: esphome
-  password: !secret ota_key
-
-wifi:
-  ssid:     !secret wireless_ssid
-  password: !secret wireless_key
-  domain:   !secret wireless_domain
-
-  ap:
-    ssid: "ESPsalon_Fallback"
-    password: !secret ap_secret
-
-captive_portal:
-
-web_server:
-  port: 80
-
-time:
-  - platform: sntp
-    id: sntp_time
-    servers: 
-      - 193.190.198.10
-#    timezone: "Europe/Brussels"
-    on_time_sync:
-      then:
-        - logger.log: "NTP : Synchronized sntp clock"
-        
-mqtt:
-  broker: domotic.home.cabestan.be
-  username: espsalon
-  password: !secret mqtt_espsalon
-
-i2c:
-  sda: 21
-  scl: 22
-  scan: true
-  frequency: 300kHz
-  id: bus_a
-
-font:
-  - file: "fonts/Roboto/Roboto-Black.ttf"
-    id: my_font_16
-    size: 16
-  - file: "fonts/Roboto/Roboto-Black.ttf"
-    id: my_font_14
-    size: 14
-  - file: "fonts/materialdesignicons-webfont.ttf"
-    id: icons_14
-    size: 14
-    glyphs:
-      - "\U000F050F" # mdi-home-thermometer
-      - "\U000F058E" # mdi-water-percent
-      - "\U000F015F" # mdi-cloud
-      - "\U000F1252" # mdi-home-lightbulb-outline
-      - "\U000F0A60" # mdi-ip-network
-
-
-display:
-  - platform: ssd1306_i2c
-    model: "SSD1306 128x64"
-    address: 0x3C
-    external_vcc: False
-    id: saloon_display
-    rotation: 90
-    # lambda: |-
-      # it.print(0, 0, id(my_font_16), "Hello World!");
-    pages:
-      - id: page1
-        lambda: |-
-          it.strftime( 32,  0, id(my_font_16), TextAlign::TOP_CENTER , "%H:%M:%S" , id(sntp_time).now()   );
-          it.printf(    0, 25, id(icons_14),   TextAlign::TOP_LEFT , "\U000F050F");
-          it.printf(   18, 25, id(my_font_14), TextAlign::TOP_LEFT , "%.1f°"  , id(temperature).state   );
-          
-          it.printf(    0, 45, id(icons_14),   TextAlign::TOP_LEFT , "\U000F058E");
-          it.printf(   18, 45, id(my_font_14), TextAlign::TOP_LEFT , "%.1f%%", id(humidity).state       );
-          
-          it.printf(    0, 65, id(icons_14),   TextAlign::TOP_LEFT , "\U000F015F");
-          it.printf(   18, 65, id(my_font_14), TextAlign::TOP_LEFT , "%.0f"  , id(pressure).state       );
-          
-          it.printf(    0, 85, id(icons_14),   TextAlign::TOP_LEFT , "\U000F1252");
-          it.printf(   18, 85, id(my_font_14), TextAlign::TOP_LEFT , "%.0f" , id(ambiantlight).state    );
-          
-          it.printf(    0, 105, id(icons_14),   TextAlign::TOP_LEFT , "\U000F0A60");
-        # it.printf(   18, 105, id(my_font_14), TextAlign::TOP_LEFT , "%s" , id(nw_connected).state    ); 
-
-switch:
-  - platform: gpio
-    name: "Esp Salon Led"
-    pin: 2
-
-
-binary_sensor:
-  - platform: gpio
-    pin: 14
-    name: "PIR Sensor"
-    device_class: motion
-
-sensor:
-  - platform: dht
-    pin: 19
-    temperature:
-      id: temperature
-      name: "Living Room Temperature"
-    humidity:
-      id: humidity
-      name: "Living Room Humidity"
-    update_interval: 10s
-    
-  - platform: bmp280_i2c
-    temperature:
-      name: "Living Room Temperature S2"
-      oversampling: 16x
-    pressure:
-      id: pressure
-      name: "Pressure"
-    address: 0x76
-    update_interval: 60s
-
-  - platform: adc
-    id: ambiantlight
-    pin: 36
-    name: "Living Room Brightness"
-    device_class: "illuminance"
-    unit_of_measurement: "lx"
-    update_interval: 5s
-    accuracy_decimals: 1
-    
-    filters:
-      - multiply: 500.0
-      # - sliding_window_moving_average:
-          # window_size: 5
-          # send_every: 5

test1.yaml

@@ -1,36 +0,0 @@
-esphome:
-  name: test1
-  platform: ESP32
-  board: esp-wrover-kit
-   
-logger:
-
-api:
-  password: !secret api_secret
-
-ota:
-  password: !secret ota_key
-
-wifi:
-  ssid:     !secret wireless_ssid
-  password: !secret wireless_key
-  domain:   !secret wireless_domain
-
-  ap:
-    ssid: "ESPsalon_Fallback"
-    password: !secret ap_secret
-
-captive_portal:
-
-web_server:
-  port: 80
-
-time:
-  - platform: sntp
-    id: sntp_time
-    servers: 
-      - 193.190.198.10
-#    timezone: "Europe/Brussels"
-    on_time_sync:
-      then:
-        - logger.log: "NTP : Synchronized sntp clock"