## Build
**Enter the venv**
> \# python3 -m venv /home/lade/python_venv.
> \# source venv/bin/activate
**Compile and upload**
> \# esphome run file.yaml
## Devices Pinout
**ESP32 - C3 - Mini**
{width=50%}
## ESP Tank
**Read the water level from the water tank**
name : esptank32
**Mapping**
| GPIO | Device |
| ------------- |:-------------:|
| GPIO0 | ADC SDA |
| GPIO1 | ADC SCL |
**Description**
Components
- TL-136 : Imerged pressure sensor, current from 4 to 20mA, working voltage 24V
- Voltage Booster : (boost from 5v to 24v) + output connected to the TL-136
- ADC 1115 : ADC 16 Bit (read -4V to +4V), measure value on the resistor
- Resistor 220 Ohm (between the TL-136 and ground)
## ESP Water
**Water consumption meter, connected to a CO2 injector, with 16x08 display**
## ESP Salon
**Multiple environment sensor and display**
## ESP Dimmer
**High power triac controller based on esp8266**