Added send and receive.

2019-09-05 19:44:19 +02:00
parent 5f351f8d96
commit 60e2e40ac0
1 changed files with 71 additions and 71 deletions
--- a/AP-Remote-Software/_433_Programming_New/_433_Programming_New.ino
+++ b/AP-Remote-Software/_433_Programming_New/_433_Programming_New.ino
@@ -1,72 +1,72 @@
-/*
-  Code to program 433 MHz KeyFob
-
-  Transmitter must be connected to Arduino Pin #10
-  Receiver must be connected to Arduino Pin #7
-
-*/
-
-#include <RCSwitch.h>
-
-long unsigned int Key[] = {0000001, 0000002, 0000003, 0000004 };
-int Keys = 4;
-
-
-RCSwitch mySwitch = RCSwitch();
-
-void setup() {
-
-  Serial.begin(9600);
-
-  delay(1000);
-  Serial.println("Press 'Send' to start programming or press Key on remote to see the value.");
-
-
-  mySwitch.enableTransmit(10); // Transmitter is connected to Arduino Pin #10
-  mySwitch.enableReceive(4);  // RF Receiver on inerrupt 4 => that is pin #7 on Micro
-
-  // Optional set pulse length.
-  // mySwitch.setPulseLength(320);
-
-  // Optional set protocol (default is 1, will work for most outlets)
-  // mySwitch.setProtocol(2);
-
-  // Optional set number of transmission repetitions.
-  // mySwitch.setRepeatTransmit(15);
-
-}
-
-void loop() {
-  int i;
-  
-  while (!Serial.available()) {    // Receive Key Codes until Send was pressed
-
-    if (mySwitch.available()) {
-      long unsigned int value = mySwitch.getReceivedValue();
-      Serial.print("Received Key: ");
-      Serial.println(value);
-      mySwitch.resetAvailable();
-    }
-  }
-  while (Serial.available()) Serial.read();
-
-  Serial.println();
-
-  for (i = 0; i < Keys; i++) {
-
-     Serial.print("Sending Key: ");
-     Serial.print(i);
-     Serial.print(", Value: ");
-     Serial.println(Key[i]);
-     Serial.println("Press 'Send' for next Key.");
-
-    while (!Serial.available()) {
-      mySwitch.send(Key[i], 24);
-      Serial.print(".");
-      delay(100);
-    }
-    Serial.println();
-    while (Serial.available()) Serial.read();
-  }
-  Serial.println("Press 'Send' to start programming or press Key on remote to see the value.");
+/*
+  Code to program 433 MHz KeyFob
+
+  Transmitter must be connected to Arduino Pin #10
+  Receiver must be connected to Arduino Pin #7
+
+*/
+
+#include <RCSwitch.h>
+
+long unsigned int Key[] = {1000001, 1000002, 1000003, 1000004 };
+int Keys = sizeof(Key)/sizeof(unsigned long); // Number of key is calculated atomatically
+
+
+RCSwitch mySwitch = RCSwitch();
+
+void setup() {
+
+  Serial.begin(9600);
+
+  delay(1000);
+  Serial.println("Press 'Send' to start programming or press a key on remote to see the value.");
+
+
+  mySwitch.enableTransmit(10); // Transmitter is connected to Arduino Pin #10
+  mySwitch.enableReceive(4);  // RF Receiver on inerrupt 4 => that is pin #7 on Micro
+
+  // Optional set pulse length.
+  // mySwitch.setPulseLength(320);
+
+  // Optional set protocol (default is 1, will work for most outlets)
+  // mySwitch.setProtocol(2);
+
+  // Optional set number of transmission repetitions.
+  // mySwitch.setRepeatTransmit(15);
+
+}
+
+void loop() {
+  int i;
+  
+  while (!Serial.available()) {    // Receive Key Codes until Send was pressed
+
+    if (mySwitch.available()) {
+      long unsigned int value = mySwitch.getReceivedValue();
+      Serial.print("Received Key: ");
+      Serial.println(value);
+      mySwitch.resetAvailable();
+    }
+  }
+  while (Serial.available()) Serial.read();
+
+  Serial.println();
+
+  for (i = 0; i < Keys; i++) {
+
+     Serial.print("Sending Key: ");
+     Serial.print(i+1);
+     Serial.print(", Value: ");
+     Serial.println(Key[i]);
+     Serial.println("Press 'Send' for next Key.");
+
+    while (!Serial.available()) {
+      mySwitch.send(Key[i], 24);
+      Serial.print(".");
+      delay(100);
+    }
+    Serial.println();
+    while (Serial.available()) Serial.read();
+  }
+  Serial.println("Press 'Send' to start programming or press a key on remote to see the value.");
 }