New programming code

AP-Remote-Software/_433_Programming_New/_433_Programming_New.ino

@@ -0,0 +1,61 @@
+/*
+  Code to program 433 MHz KeyFob
+  
+  Transmitter must be connected to Arduino Pin #10
+
+*/
+
+#include <RCSwitch.h>
+
+long unsigned int Key[] = {0000001, 0000002, 0000003, 0000004 };
+int Keys = 4;
+
+
+RCSwitch mySwitch = RCSwitch();
+
+void setup() {
+
+  Serial.begin(9600);
+
+  delay(1000);
+  Serial.println("Press 'Send' to start programming!");
+
+  // Transmitter is connected to Arduino Pin #10
+  mySwitch.enableTransmit(10);
+
+  // Optional set pulse length.
+  // mySwitch.setPulseLength(320);
+
+  // Optional set protocol (default is 1, will work for most outlets)
+  // mySwitch.setProtocol(2);
+
+  // Optional set number of transmission repetitions.
+  // mySwitch.setRepeatTransmit(15);
+
+}
+
+void loop() {
+  int i;
+  char buffer[40];
+
+  while (!Serial.available()) delay(10);
+  while (Serial.available()) Serial.read();
+
+  Serial.println();
+
+  for (i = 0; i < Keys; i++) {
+
+    sprintf(buffer, "Sending Key: %d, Value: %07d", i + 1, Key[i]);
+    Serial.println(buffer);
+    Serial.println("Press 'Send' for next Key.");
+
+    while (!Serial.available()) {
+      mySwitch.send(Key[i], 24);
+      Serial.print(".");
+      delay(100);
+    }
+    Serial.println();
+    while (Serial.available()) Serial.read();
+  }
+  Serial.println("Press 'Send' to start programming!");
+}